Version 6.2 573 February 2011
SIP User's Manual 8. IP Telephony Capabilities
¾ To configure IP Profiles:
1. Open the 'IP Profile Settings' page (Configuration tab > VoIP menu > Coders And
Profiles submenu > IP Profile Settings).
2. Add IP Profile #1 for LAN users:
a. From the 'Profile ID' drop-down list, select '1'.
b. In the 'Profile Name', enter a brief description (e.g., "LAN Users").
c. From the 'Extension Coders Group ID', select '1'. This is the Coder Group that
you defined for the LAN users in ''Step 1: Define Coder Groups'' on page 571.
d. Click Submit.
Figure 8-89:
Defining IP Profile for LAN Users
3. Add IP Profile #2 for the ITSP:
a. From the 'Profile ID' drop-down list, select '2'.
b. In the 'Profile Name', enter a brief description (e.g., "ITSP").
c. From the 'Extension Coders Group ID', select '2'. This is the Coder Group that
you defined for the ITSP in ''Step 1: Define Coder Groups'' on page 571.
d. From the 'Allo
wed Coders Group ID', select '1'. This is the Allowed Coders Group
that you defined for the ITSP in ''Step 2: Define Allowed Coders'' on page 572.
To Next Page
Loading...
