Version 6.2 311 February 2011
SIP User's Manual 3. Web-Based Management
¾ To create a L2TP VPN connection:
1. In the 'Connections' page, click the New
icon; the Connection Wizard opens.
2. Select the 'Connect to a Virtual Private Network over the Internet' option, and then
click Next.
Figure 3-256: Selecting VPN Type for IPSec
3. Select the 'VPN Client or Point-To-Point' option, and then click Next.
Figure 3-257: Selecting L2TP to Connect to Remote VPN Server
4. Select the 'Layer 2 Tunneling Protocol over Internet Protocol Security (L2TP IPSec
VPN)' option, and then click Next.
Figure 3-258: Defining L2TP Properties
5. In the 'Remote Tunnel Endpoint Address' field, enter the remote tunnel endpoint
address. This is the IP address or domain name of the remote network computer,
which serves as the tunnel's endpoint.
6. In the 'Login User Name' and 'Login Password' fields, enter the username and
password provided by the administrator of the network you are trying to access.
To Next Page
Loading...
