Version 6.2 241 February 2011
SIP User's Manual 3. Web-Based Management
Note: When Web Filtering is enabled, HTTP services cannot be blocked by Access
Control.
¾ To configure LAN restrictions rule:
1. Click the LAN Restrictions item (Configuration tab > Data menu > Firewall and
ACL submenu > LAN Restrictions); the following page appears:
Figure 3-142: Configuring LAN Restriction Rules
2. Click the New
icon; the following page appears:
Figure 3-143: Adding an Access Control Rule
3. From the 'Address' drop-down list, specify the computer or group of computers on
which you would like to apply the access control rule. Select an address or a name
from the list to apply the rule on the corresponding host, or 'Any' to apply the rule on
all the device's LAN hosts. If you want to add a new address, select the 'User Defined'
option, and then follow the sequence to add a new Network Object, representing the
new host (see ''Configuring Network Objects'' on page 284).
4. From the 'Protocol' drop-down list, select or specify the type of protocol. Selecting the
'Show All Services' option expands the list of available protocols. Select a protocol or
add a new one using the 'User Defined' option, and then follow the sequence to add a
new Service representing the protocol (see ''Configuring Protocols'' on page 283).
5. Select the 'Reply an HTM
L Page to the Blocked Client' check box to display the
following message to the client: "Access Denied – this computer is not allowed to surf
the WAN. Please contact your admin.". When this check box is cleared, the client's
packets are simply ignored and no notification is issued.
6. From the 'Schedule' drop-down list, select the time during which the rule is active. By
default, the rule is always active. However, you can configure scheduler rules by
selecting 'User Defined', and then defining the day and time period during which the
rule is active. Once a scheduler rule(s) is defined, the 'Schedule' drop-down list allows
you to choose an available rule (for adding user-defined schedule rules, see
''Configuring Scheduler Rules'' on page 285).
7. Click OK to save your changes; the LAN restriction rule is displayed in the LAN
Restriction list.
To Next Page
Loading...
