SIP User's Manual 120 Document #: LTRT-12804
Mediant 800 MSBG
Notes:
• When operating with multiple IP Groups, the default Proxy server must
not be used (i.e., the parameter IsProxyUsed must be set to 0).
• If different SRDs are configured in the ‘IP Group’ and ‘Proxy Set’ tables,
the SRD defined for the Proxy Set takes precedence.
• You cannot modify IP Group index 0. This IP Group is set to default
values and is used by the device when IP Groups are not implemented.
• You can also configure the IP Groups table using the ini file table
parameter IPGroup (see SIP Configuration Parameters).
¾ To configure IP Groups:
1. Open the 'IP Group Table' page (Configuration tab > VoIP menu > Control Network
submenu > IP Group Table).
Figure 3-64: IP Group Table
2. Configure the IP group parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
To Next Page
Loading...
