AudioCodes Mediant 800 MSBG - ISDN BRI Parameters

Version 6.2 781 February 2011
SIP User's Manual 12. Configuration Parameters Reference
Parameter Description
Web/EMS: RTP DSCP for MLPP
Immediate
[MLPPImmediateRTPDSCP]
Defines the RTP DSCP for MLPP Immediate precedence call
level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined
for IP Profiles per call (using the parameter IPProfile).
Web/EMS: RTP DSCP for MLPP
Flash
[MLPPFlashRTPDSCP]
Defines the RTP DSCP for MLPP Flash precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined
for IP Profiles per call (using the parameter IPProfile).
Web/EMS: RTP DSCP for MLPP
Flash Override
[MLPPFlashOverRTPDSCP]
Defines the RTP DSCP for MLPP Flash-Override precedence
call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined
for IP Profiles per call (using the parameter IPProfile).
Web/EMS: RTP DSCP for MLPP
Flash-Override-Override
[MLPPFlashOverOverRTPDSCP]
Defines the RTP DSCP for MLPP Flash-Override-Override
precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined
for IP Profiles per call (using the parameter IPProfile).
12.12.5.13 ISDN BRI Parameters
The automatic dialing upon off-hook parameters are described in the table below.
Table 12-50: Automatic Dialing Parameters
Parameter Description
Web: ISDN Supp Services Table
[ISDNSuppServ]
This ini file table parameter defines BRI phone extension numbers
per BRI port and configures various ISDN supplementary services
per BRI endpoint. The format of this parameter is as follows:
[ ISDNSuppServ ]
FORMAT ISDNSuppServ_Index = ISDNSuppServ_PhoneNumber,
ISDNSuppServ_Module, ISDNSuppServ_Port,
ISDNSuppServ_UserId, ISDNSuppServ_UserPassword,
ISDNSuppServ_CallerID, ISDNSuppServ_IsPresentationRestricted,
ISDNSuppServ_IsCallerIDEnabled;
[ \ISDNSuppServ ]
For example:
ISDNSuppServ 0 = 400, 1, 1, user, pass, callerid, 0, 1;
ISDNSuppServ 1 = 401, 1, 1, user, pass, callerid, 0, 1;