SIP User's Manual 782 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Notes:
For an explanation on each of the table's parameters and for
configuring the table using the Web interface, see ''Configuring
ISDN Supplementary Services'' on page 191.
For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
BRI-to-SIP Supplementary Services Codes for Call Forward
Note: Upon receipt of an ISDN Facility message for call forward from the BRI phone, the device
sends a SIP INVITE to the softswitch with a user-defined code in the SIP To header, representing the
reason for the call forward. For a detailed description of BRI call forwarding, see ''BRI Call
Forwarding'' on page 460.
Call Forward Unconditional
[SuppServCodeCFU]
Prefix code for activating Call Forward Unconditional sent to the
softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward Unconditional
Deactivation
[SuppServCodeCFUDeact]
Prefix code for deactivating Call Forward Unconditional Deactivation
sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward on Busy
[SuppServCodeCFB]
Prefix code for activating Call Forward on Busy sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward on Busy
Deactivation
[SuppServCodeCFBDeact]
Prefix code for deactivating Call Forward on Busy Deactivation sent
to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward on No Reply
[SuppServCodeCFNR]
Prefix code for activating Call Forward on No Reply sent to the
softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward on No Reply
Deactivation
[SuppServCodeCFNRDeact]
Prefix code for deactivating Call Forward on No Reply Deactivation
sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
To Next Page
Loading...
