Version 6.2 219 February 2011
SIP User's Manual 3. Web-Based Management
Table 3-38: SAS IP2IP Routing Table Parameters
Parameter Description
Matching Characteristics
Source IP Group ID
[IP2IPRouting_SrcIPGroupID]
This parameter is not applicable.
Source Username Prefix
[IP2IPRouting_SrcUsernamePrefix]
The prefix of the user part of the incoming INVITE’s source
URI (usually the From URI).
The default is "*".
Note: The prefix can be a single digit or a range of digits.
For available notations, see ''Dialing Plan Notation for
Routing and Manipulation'' on page 413.
Source Host
[IP2IPRouting_SrcHost]
The host part of the incoming SIP INVITE’s source URI
(usually the From URI). If this rule is not required, leave the
field empty. To denote any host name, use the asterisk (*)
symbol.
The default is "*".
Destination Username Prefix
[IP2IPRouting_DestUsernamePrefix]
The prefix of the incoming SIP INVITE's destination URI
(usually the Request URI) user part. If this rule is not
required, leave the field empty. To denote any prefix, use the
asterisk (*) symbol.
The default is "*".
Destination Host
[IP2IPRouting_DestHost]
The host part of the incoming SIP INVITE’s destination URI
(usually the Request URI). If this rule is not required, leave
the field empty. The asterisk (*) symbol can be used to
depict any destination host.
The default is "*".
Request Type
[IP2IPRouting_RequestType]
The type of incoming SIP request:
[0] All (default)
[1] INVITE
[2] REGISTER
[3] SUBSCRIBE
[4] INVITE & REGISTER
[5] INVITE & SUBSCRIBE
Operation Routing Rule (performed when match found in above characteristics)
Destination Type
[IP2IPRouting_DestType]
Determines the destination type to which the outgoing
INVITE is sent.
[0] IP Group (default) = The INVITE is sent to the IP
Group’s Proxy Set (if the IP Group is of SERVER type) \
registered contact from the database (if USER type).
[1] Dest Address = The INVITE is sent to the address
configured in the following fields: 'Destination SRD ID',
'Destination Address', 'Destination Port', and 'Destination
Transport Type'.
[2] Request URI = The INVITE is sent to the address
indicated in the incoming Request-URI. If the fields
'Destination Port' and 'Destination Transport Type' are
configured, the incoming Request-URI parameters are
To Next Page
Loading...
