AudioCodes Mediant 800 MSBG - Configuration Tab; System Settings; Configuring Application Settings; Figure 3-25: Applications Settings Page

Version 6.2 65 February 2011
SIP User's Manual 3. Web-Based Management
3.3 Configuration Tab
The Configuration tab on the Navigation bar displays menus in the Navigation tree related
to device configuration. This tab provides the following main menus:
 System (see ''System Settings'' on page 65)
 VoIP (see Vo
IP Settings on page 83)
 Data (see
Data Settings on page 222)
3.3.1 System Settings
The System menu includes the following:
 Application Settings item (see ''Configuring Application Settings'' on page 65)
 Syslog Settings item (see ''
Configuring Syslog Settings'' on page 68)
 Regi
onal Settings item (see ''Configuring Regional Settings'' on page 69)
 Certificates it
em (see ''Configuring Certificates'' on page 69)
 Manag
ement submenu (see ''Management Settings'' on page 73)
3.3.1.1 Configuring Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Network Time Protocol (NTP), daylight saving time, and Network File System (NFS). For
a description of these parameters, see ''Configuration Parameters Reference'' on page
653.
¾ To configure application settings:
1. Open the 'Application Settings' page (Configuration tab > System menu >
Application Settings).
Figure 3-25: Applications Settings Page