Version 6.2 227 February 2011
SIP User's Manual 3. Web-Based Management
Specify the following:
♦ PPTP Server Host Name or IP Address
♦ Login User Name
♦ Login Password
♦ Internet Protocol - select the method used by your ISP for assigning an IP
address.
• 'Layer 2 Tunneling Protocol (L2TP)':
Figure 3-120: L2TP WAN Connection Type
Specify the following:
♦ L2TP Server Host Name or IP Address
♦ Login User Name
♦ Login Password
♦ Internet Protocol - select the method used by your ISP for assigning an IP
address
3. For advanced WAN settings, click the Click here for Advanced Settings link. For a
detailed description of configuring advanced settings, see ''Editing Existing
Connections'' on page 328.
3.3.3.2.2 Configuring T1 WAN Interface
The T1 WAN interface can be configured to transmit/receive data using IP over Point-to-
Point Protocol (PPP), IP over High-Level Data Link Control (HDLC), or IP over Multilink
Point-to-Point Protocol (also referred to as ML-PPP, MP, MPPP, MLP, or Multilink) framing.
The WAN connection must contain a physical interface (T1) and a Layer-2 protocol (PPP,
HDLC, or ML-PPP). The physical interface provides the actual bandwidth between the
device and the network provider. The Layer 2 protocol defines how the data is packaged
and presented on the physical interface. Layer 2 protocols must be configured to match the
protocol provided on the circuit.
To Next Page
Loading...
