SIP User's Manual 308 Document #: LTRT-12804
Mediant 800 MSBG
3.3.3.9.7 Point-to-Point Tunneling Protocol Server (PPTP Server)
The device can act as a Point-to-Point Tunneling Protocol Server (PPTP Server), accepting
PPTP client connection requests.
¾ To create a PPTP server:
1. In the 'Connections' page, click the New
icon; the Connection Wizard opens.
2. Select the 'Connect to a Virtual Private Network over the Internet' option, and then
click Next.
Figure 3-249: VPN Connection Type
3. Select the 'VPN Server' option, and then click Next.
Figure 3-250: Selecting the VPN Protocol - PPTP Server
4. Select the 'Point-to-Point Tunneling Protocol Server (PPTP Server)' option, and then
click Next.
Figure 3-251: Defining Remote Client Address Range
To Next Page
Loading...
