SIP User's Manual 676 Document #: LTRT-12804
Mediant 800 MSBG
12.4.5 SSH Parameters
The Secure Shell (SSH) parameters are described in the table below.
Table 12-20: SSH Parameters
Parameter Description
Web/EMS: SSH Server Enable
[SSHServerEnable]
Enables or disables the device's embedded SSH server.
[0] Disable (default)
[1] Enable
Web/EMS: SSH Server Port
[SSHServerPort]
Defines the port number for the embedded SSH server.
Range is any valid port number. The default port is 22.
Web/EMS: WAN SSH Server
Port
[WanMgmtSSHPort]
Defines the WAN management port for the embedded SSH
server.
Range is any valid port number. The default port is 22.
[SSHAdminKey]
Determines the RSA public key for strong authentication to
logging in to the SSH interface (if enabled).
The value should be a base64-encoded string. The value can be
a maximum length of 511 characters.
For additional information, refer to the Product Reference Manual.
[SSHMaxLoginAttempts]
Defines the maximum SSH login attempts allowed for entering an
incorrect password by an administrator before the SSH session is
rejected.
The valid range is 1 to 3. the default is 3.
[SSHEnableLastLoginMessage]
Enables or disables the message display in SSH sessions of the
time and date of the last SSH login. The SSH login message
displays the number of unsuccessful login attempts since the last
successful login.
[0] Disable
[1] Enable (default)
Note: The last SSH login information is cleared when the device
is reset.
[SSHMaxSessions]
Maximum number of simultaneous SSH sessions.
The valid range is 1 to 2. The default is 2 sessions.
[SSHRequirePublicKey]
Enables or disables RSA public keys for SSH.
[0] = RSA public keys are optional if a value is configured for
the parameter SSHAdminKey (default).
[1] = RSA public keys are mandatory.
Note: To define the key size, use the TLSPkeySize parameter.
[TLSPkeySize]
Defines the key size (in bits) for RSA public-key encryption for
newly self-signed generated keys for SSH.
[512]
[768]
[1024] (default)
[2048]
To Next Page
Loading...
