Version 6.2 93 February 2011
SIP User's Manual 3. Web-Based Management
¾ To configure the Internal SRV table:
1. Open the 'Internal SRV Table' page (Configuration tab > VoIP menu > Network
submenu > DNS submenu > Internal SRV Table).
Figure 3-45: Internal SRV Table Page
2. In the 'Domain Name' field, enter the host name to be translated. You can enter a
string of up to 31 characters.
3. From the 'Transport Type' drop-down list, select a transport type.
4. In the 'DNS Name 1' field, enter the first DNS A-Record to which the host name is
translated.
5. In the 'Priority', 'Weight' and 'Port' fields, enter the relevant values
6. Repeat steps 4 through 5, for the second and third DNS names, if required.
7. Repeat steps 2 through 6, for each entry.
8. Click the Submit button to save your changes.
9. To save the changes so they are available after a hardware reset or power fail, see
''Saving Configuration'' on page 336.
To Next Page
Loading...
