SIP User's Manual 376 Document #: LTRT-12804
Mediant 800 MSBG
5.3 Configuring Trunks
This section describes the provisioning of trunks:
E1/T1Trunk configuration (see ''General Trunk Configuration'' on page 376)
ISDN NFAS (see ''
Configuring ISDN NFAS'' on page 377)
5.3.1 General Trunk Configuration
This section describes how to provision a PSTN trunk.
¾ To provision a trunk:
1. In the Navigation pane, select VoIP > PSTN > DS1 Trunks; the DS1 Trunks List
appears.
Figure 5-5: DS1 Trunks List Table
2. Select a trunk, and then in the Navigation pane, click VoIP > PSTN > Trunks
Channels; the Trunks Channels Table appears in the Main pane.
Figure 5-6: Trunks Channels Table
To Next Page
Loading...
