SIP User's Manual 312 Document #: LTRT-12804
Mediant 800 MSBG
7. In the 'IPSec Shared Secret' field, enter the IPSec shared secret, which is the
encryption key jointly decided upon with the network you are trying to access.
8. Click Next; the following is displayed if successfully configured:
Figure 3-259: L2TP Successfully Added
9. Select the 'Edit the Newly Created Connection' check box if you want to edit the new
connection after clicking Finish.
10. Click Finish to save the settings; the new L2TP IPSec VPN connection is added to the
network connections list.
To view and edit the L2TP connection, follow the procedure below:
¾ To edit the L2TP connection:
1. In the 'Connections' page, click the L2TP VPN link; the General tab appears
displaying general properties.
2. Select the Settings tab to edit various settings (see ''Editing Existing Connections'' on
page 328).
3. Select the Routing tab to edit the routing parameters (see ''Editing Existing
Connections'' on page 328).
4. Select the PPP tab.
Figure 3-260: PPP Tab
To Next Page
Loading...
