AudioCodes Mediant 800 MSBG - Figure 3-208: Defining Scheduler Rule Name

SIP User's Manual 286 Document #: LTRT-12804
Mediant 800 MSBG
2. Click the New Entry link; the following page appears:
Figure 3-208: Defining Scheduler Rule Name
3. In the 'Name' field, enter a name for the Scheduler rule.
4. Under the 'Rule Activity Settings' group, specify whether the rule is active or inactive
during the designated time period, by selecting the appropriate option.
5. Click the New Time Segment Entry link to define the rule's time segment; the
following page appears:
Figure 3-209: Defining Time Segment
6. Under the 'Days of Week' group, select the day(s) of the week on which the rule is
active or inactive.
7. Under the 'Hours Range' group, click the New Hours Range Entry link to define a
specific hour range for the rule; the following page appears:
Figure 3-210: Defining Hour Range