SIP User's Manual 362 Document #: LTRT-12804
Mediant 800 MSBG
• Blocked Events group:
♦ All Blocked Connection Attempts: generates a log message for each
blocked attempt to establish an inbound connection to the home network or
vice versa. You can enable logging of blocked packets of specific types by
disabling this option, and enabling some of the more specific options listed
below it.
♦ Generate a log message for specific events that are blocked such as
SynFlood. A log message is generated if either the corresponding check box
is checked, or the 'All Blocked Connection Attempts' check box is selected.
• Other Events group:
♦ Remote Administration Attempts: generates a log message for each
remote administration connection attempt, whether successful or not.
♦ Connection States: provide additional information about every change in a
connection opened by the firewall. Use this option to track connection
handling by the firewall and Application Level Gateways (ALGs).
• Log Buffer group:
♦ Prevent Log Overrun: stops logging firewall activities when the memory
allocated for the log fills up.
3.5.3.4 Viewing QoS Queues Statistics
You can view an accurate, real-time information on the traffic moving through your defined
device classes. For example, the amount of packets sent, dropped or delayed are just a
few of the parameters that you can monitor per shaping class.
¾ To view your class statistics:
Click the QoS Class Statistics item (Status & Diagnostics tab > Data Status menu
> QoS Queues Statistics); the following page appears:
Figure 3-317: QoS Queues Statistics Page
Note: Class statistics are only available after defining at least one class; otherwise,
the page does not display any information.
To Next Page
Loading...
