Version 6.2 635 February 2011
SIP User's Manual 9. VoIP Networking Capabilities
Example 3 - Three Interfaces: one exclusively for management (OAMP applications) and
two others for Call Control and RTP (Control and Media applications) :
Table 9-13: Multiple Interface Table - Example 3
Index
Allowed
Applications
Interface
Mode
IP Address
Prefix
Length
Default
Gateway
VLAN
ID
Interface
Name
0 OAMP IPv4
Manual
192.168.0.2 16 192.168.0.1 1 Mgmt
1 Media &
Control
IPv4
Manual
200.200.85.14 24 200.200.85.1 201 MediaCntrl1
2 Media &
Control
IPv4
Manual
200.200.86.14 24 200.200.86.1 202 MediaCntrl2
Additional static routing rules
Table 9-14: Routing Table - Example 3
Destination
Destination Subnet
Mask/Prefix Length
Gateway Interface Metric
176.85.49.0 24 192.168.0.10 0 1
All other parameters are set to their respective default values. The DNS/NTP applications
are left with their default application types.
The corresponding ini file configuration is shown below:
; Interface Table Configuration:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 0, 10, 192.168.0.2, 16, 192.168.0.1, 1, Mgmt;
InterfaceTable 1 = 5, 10, 200.200.85.14, 24, 200.200.85.1, 201,
MediaCntrl1;
InterfaceTable 2 = 5, 10, 200.200.86.14, 24, 200.200.86.1, 202,
MediaCntrl2;
[\InterfaceTable]
; Routing Table Configuration:
[ StaticRouteTable ]
FORMAT StaticRouteTable_Index = StaticRouteTable_InterfaceName,
StaticRouteTable_Destination, StaticRouteTable_PrefixLength,
StaticRouteTable_Gateway, StaticRouteTable_Description;
StaticRouteTable 0 = 0, 176.85.49.0, 24, 192.168.11.1, ;
[ \StaticRouteTable ]