Version 6.2 81 February 2011
SIP User's Manual 3. Web-Based Management
3.3.1.6.6.3 Configuring SNMP Trusted Managers
The 'SNMP Trusted Managers' page allows you to configure up to five SNMP Trusted
Managers, based on IP addresses. By default, the SNMP agent accepts SNMP Get and
Set requests from any IP address, as long as the correct community string is used in the
request. Security can be enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP requests.
¾ To configure SNMP Trusted Managers:
1. Open the 'SNMP Trusted Managers' page (Maintenance tab > System menu >
Management submenu > SNMP submenu > SNMP Trusted Managers).
Figure 3-38: SNMP Trusted Managers
2. Select the check box corresponding to the SNMP Trusted Manager that you want to
enable and for whom you want to define an IP address.
3. Define an IP address in dotted-decimal notation.
4. Click the Submit button to apply your changes.
5. To save the changes, see ''Saving Configuration'' on page 336.
3.3.1.6.6.4 Configuring SNMP V3 Users
The 'SNMP v3 Users' page allows you to configure authentication and privacy for up to 10
SNMP v3 users.
¾ To configure the SNMP v3 users:
1. Open the 'SNMP v3 Users' page (Maintenance tab > System menu > Management
submenu > SNMP submenu > SNMP V3 Users).
Figure 3-39: SNMP V3 Setting Page
2. To add an SNMP v3 user, in the 'Add Index' field, enter the desired row index, and
then click Add Index. A new row appears.
3. Configure the SNMP V3 Setting parameters according to the table below.
To Next Page
Loading...
