Version 6.2 349 February 2011
SIP User's Manual 3. Web-Based Management
¾ To view WAN port information:
Open the ‘WAN Port Information’ page (Status & Diagnostics tab > System Status
menu > WAN Port Information).
Figure 3-303: WAN Port Information Page
3.5.1.4 Carrier-Grade Alarms
The Carrier-Grade Alarms submenu contains the following item:
Active Alarms (see ''Viewing Active Alarms'' on page 349)
3.5.1.4.1 Viewing Active Alarms
The 'Active Alarms' page displays a list of currently active alarms. You can also access this
page from the 'Home' page (see ''Using the Home Page'' on page 59).
¾ To view the list of alarms:
Open the 'Active Alarms’ page (Status & Diagnostics tab > System Status menu >
Carrier-Grade Alarms > Active Alarms).
Figure 3-304: Active Alarms Page
For each alarm, the following information is provided:
Severity: severity level of the alarm:
• Critical - alarm displayed in red
• Major - alarm displayed in orange
• Minor - alarm displayed in yellow
Source: unit from which the alarm was raised
Description: brief explanation of the alarm
Date: date and time that the alarm was generated
You can view the next 30 alarms (if exist), by pressing the F5 key.
To Next Page
Loading...
