Version 6.2 151 February 2011
SIP User's Manual 3. Web-Based Management
3.3.2.11.2 Manipulation
The Manipulation Tables submenu allows you to configure number manipulation and
mapping of NPI/TON to SIP messages. This submenu includes the following items:
îš„ General Settings (see ''Configuring General Settings'' on page 151)
îš„ Manipul
ation tables (see ''Configuring Number Manipulation Tables'' on page 152):
• Dest Number IP->Tel
• Dest Number Tel->IP
• Source Number IP->Tel
• Source Number Tel->IP
îš„ Redirect Number IP->Tel (see Configuring Redirect Number IP to Tel on page 156)
îš„ Redi
rect Number Tel->IP (see ''Configuring Redirect Number Tel to IP'' on page 158)
îš„ Phone Conte
xt (see ''Mapping NPI/TON to SIP Phone-Context'' on page 160)
îš„ Rele
ase Cause Mapping (see Configuring Release Cause Mapping on page 162)
3.3.2.11.2.1 Configuring General Settings
The 'General Settings' page allows you to configure general manipulation parameters. For
a description of the parameters appearing on this page, see ''Configuration Parameters
Reference'' on page 653.
¾ To configure the general manipulation parameters:
1. Open the 'General Settings' page (Configuration tab > VoIP menu > GW and IP to
IP submenu > Manipulations submenu >General Settings).
Figure 3-76: General Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
To Next Page
Loading...
Need help?
General
