Version 6.2 339 February 2011
SIP User's Manual 3. Web-Based Management
2. Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
3. Click the Load File button corresponding to the file you want to load.
4. Repeat steps 2 through 3 for each file you want to load.
5. Save the loaded auxiliary files to flash memory, see ''Saving Configuration'' on page
336 an
d reset the device (if you have loaded a Call Progress Tones file), see
''Resetting the Device'' on page 334.
3.4.2.2 Loading Software Upgrade Key
The 'Software Upgrade Key Status' page allows you to load a new Software Upgrade Key
to the device. The device is supplied with a Software Upgrade Key, which determines the
device's supported features, capabilities, and available resources. The availability of certain
Web pages depends on the loaded Software Upgrade Key. You can upgrade or change
your device's supported features by purchasing a new Software Upgrade Key to match
your requirements.
The Software Upgrade Key is provided in string format in a text-based file (*.out). When
you load a Software Upgrade Key, it is loaded to the device's non-volatile flash memory
and overwrites the previously installed key.
You can load a Software Upgrade Key using one of the following management tools:
Web interface
AudioCodes’ EMS (refer to EMS User’s Manual or EMS Product Description)
Warning: Do not modify the contents of the Software Upgrade Key file.
Note: The Software Upgrade Key is an encrypted key.
To Next Page
Loading...
