AudioCodes Mediant 800 MSBG - Figure 3-31: Web Security Page; Figure 3-32: Telnet;Ssh Settings Page

SIP User's Manual 76 Document #: LTRT-12804
Mediant 800 MSBG
3.3.1.6.2 Configuring Web Security Settings
The 'WEB Security Settings' page is used to define a secure Web access communication
method. For a description of these parameters, see ''Web and Telnet Parameters'' on page
662.
¾ To define Web access security:
1. Open the 'WEB Security Settings' page (Configuration tab > System menu >
Management submenu > WEB Security Settings).
Figure 3-31: Web Security Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
3.3.1.6.3 Configuring Telnet and SSH Settings
The 'Telnet/SSH Settings' page is used to define Telnet and Secure Shell (SSH). For a
description of these parameters, see ''Web and Telnet Parameters'' on page 662.
¾ To define Telnet and SSH:
1. Open the 'Telnet/SSH Settings' page (Configuration tab > System menu >
Management submenu > Telnet/SSH Settings).
Figure 3-32: Telnet/SSH Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.