Version 6.2 67 February 2011
SIP User's Manual 3. Web-Based Management
Table 3-5: NFS Settings Parameters
Parameter Description
Index The row index of the remote file system.
The valid range is 1 to 16.
Host Or IP The domain name or IP address of the NFS server. If a domain name is
provided, a DNS server must be configured.
Root Path Path to the root of the remote file system in the format: /[path]. For
example, '/audio'.
NFS Version NFS version used to access the remote file system.
[2] NFS Version 2
[3] NFS Version 3 (default)
Authentication Type Authentication method used for accessing the remote file system.
[0] Null
[1] Unix (default)
User ID User ID used in authentication when using Unix.
The valid range is 0 to 65537. The default is 0.
Group ID Group ID used in authentication when using Unix.
The valid range is 0 to 65537. The default is 1.
VLAN Type The VLAN type for accessing the remote file system.
[0] OAM
[1] MEDIA (default)
Note: This parameter applies only if VLANs are enabled or if Multiple
IPs is configured (see ''Network Configuration'' on page 620).
To Next Page
Loading...
