AudioCodes Mediant 800 MSBG - Network Application Parameters

SIP User's Manual 696 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
[PingPongKeepAliveTime]
Defines the periodic interval (in seconds) after which a “ping”
(double-CRLF) keep-alive is sent to a proxy/registrar, using the
CRLF Keep-Alive mechanism.
The default range is 5 to 2,000,000. The default is 120.
The device uses the range of 80-100% of this user-defined
value as the actual interval. For example, if the parameter
value is set to 200 sec, the interval used is any random time
between 160 to 200 seconds. This prevents an “avalanche” of
keep-alive by multiple SIP UAs to a specific server.
12.8.2 Network Application Parameters
The SIP network application parameters are described in the table below.
Table 12-26: SIP Network Application Parameters
Parameter Description
Web: Signaling Routing Domain (SRD) Table
EMS: SRD Table
[SRD]
This ini file table parameter configures the Signaling Routing Domain
(SRD) table. The format of this parameter is as follows:
[SRD]
FORMAT SRD_Index = SRD_Name, SRD_MediaRealm,
SRD_IntraSRDMediaAnchoring, SRD_BlockUnRegUsers,
SRD_MaxNumOfRegUsers, SRD_EnableUnAuthenticatedRegistrations;
[\SRD]
For example:
SRD 1 = LAN1_SRD, Mrealm1, 0, 1, 15, 1;
SRD 2 = LAN2_SRD, Mrealm2, 0, 1, 15, 1;
Notes:
 This table can include up to 32 indices (where 0 is the first index).
 For a detailed description of the table's individual parameters and for
configuring the table using the Web interface, see ''Configuring SRD
Table'' on page 114.
 For a description on configuring ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
Web: SIP Interface Table
EMS: SIP Interfaces Table
[SIPInterface]
This ini file table parameter configures the SIP Interface table. The SIP
Interface represents a SIP signaling entity, comprising ports (UDP, TCP,
and TLS) and associated with a specific IP interface and an SRD ID. The
format of this parameter is as follows:
[SIPInterface]
FORMAT SIPInterface_Index = SIPInterface_NetworkInterface,
SIPInterface_ApplicationType, SIPInterface_UDPPort,
SIPInterface_TCPPort, SIPInterface_TLSPort, SIPInterface_SRD;
[\SIPInterface]
For example: