Version 6.2 177 February 2011
SIP User's Manual 3. Web-Based Management
3.3.2.11.4 DTMF and Supplementary
The DTMF and Supplementary submenu allows you to configure DTMF and
supplementary parameters. This submenu includes the following page items:
DTMF & Dialing (see ''Configuring DTMF and Dialing'' on page 177)
Supplem
entary Services (see ''Configuring Supplementary Services'' on page 177)
3.3.2.11.4.1 Configuring DTMF and Dialing
The 'DTMF & Dialing' page is used to configure parameters associated with dual-tone
multi-frequency (DTMF) and dialing. For a description of the parameters appearing on this
page, see ''Configuration Parameters Reference'' on page 653.
¾ To configure the DTMF and dialing parameters:
1. Open the 'DTMF & Dialing' page (Configuration tab > VoIP menu > GW and IP to IP
submenu > DTMF & Supplementary submenu > DTMF & Dialing).
Figure 3-88: DTMF & Dialing Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 336.
3.3.2.11.4.2 Configuring Supplementary Services
The 'Supplementary Services' page is used to configure parameters associated with
supplementary services. For a description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 653. For an ov
erview on supplementary
services, see ''Working with Supplementary Services'' on page 453.
To Next Page
Loading...
