SIP User's Manual 298 Document #: LTRT-12804
Mediant 800 MSBG
¾ To create a PPPoE connection:
1. In the 'Connections' page, click the New
icon; the Connection Wizard opens.
2. Select the 'Internet Connection' option, and then click Next.
Figure 3-230: Defining Internet Connection Type
3. Select the 'Point-to-Point Protocol over Ethernet (PPPoE)' option, and then click Next.
Figure 3-231: Selecting Underlying Device
4. Select the underlying device for which you want to create the connection, and then
click Next.
Figure 3-232: Defining PPPoE Properties
5. In the 'Login User Name' and 'Login Password' fields, enter the PPPoE username and
password provided by your ISP, and then click Next; the following is displayed if
successfully configured:
Figure 3-233: PPPoE Connection Added Successfully
6. Select the 'Edit the Newly Created Connection' check box if you want to edit the new
connection after clicking Finish.
7. Click Finish to save the settings; the new PPPoE connection is added to the network
connections list.
For editing the PPPoE connection, follow the procedure below:
To Next Page
Loading...
