SIP User's Manual 86 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Web: Interface Mode
[InterfaceTable_InterfaceMode]
Determines the method that this interface uses to calculate its
IP address.
[3] IPv6 Manual Prefix = IPv6 manual prefix IP address
assignment.
[4] IPv6 Manual = IPv6 manual IP address assignment.
[10] IPv4 Manual = IPv4 manual IP address assignment.
Note: IPv6 interfaces are supported when the device operates
with voice functionality only (i.e., without data-routing
functionality). This support requires a special Software
Upgrade Key for the device. For further information, contact
AudioCodes.
Web/EMS: IP Address
[InterfaceTable_IPAddres]
The IPv4/IPv6 IP address in dotted-decimal notation.
Web/EMS: Prefix Length
[InterfaceTable_PrefixLength]
Defines the Classless Inter-Domain Routing (CIDR)-style
representation of a dotted decimal subnet notation. The CIDR-
style representation uses a suffix indicating the number of bits
which are set in the dotted decimal format (e.g. 192.168.0.0/16
is synonymous with 192.168.0.0 and a subnet of 255.255.0.0.
Defines the number of ‘1’ bits in the subnet mask (i.e.,
replaces the standard dotted-decimal representation of the
subnet mask for IPv4 interfaces). For example: A subnet mask
of 255.0.0.0 is represented by a prefix length of 8 (i.e.,
11111111 00000000 00000000 00000000), and a subnet
mask of 255.255.255.252 is represented by a prefix length of
30 (i.e., 11111111 11111111 11111111 11111100).
The prefix length is a Classless Inter-Domain Routing (CIDR)
style presentation of a dotted-decimal subnet notation. The
CIDR-style presentation is the latest method for interpretation
of IP addresses. Specifically, instead of using eight-bit address
blocks, it uses the variable-length subnet masking technique to
allow allocation on arbitrary-length prefixes (refer to
http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing
for more information).
For IPv4 Interfaces, the prefix length values range from 0 to
31. For IPv6 interfaces, the prefix length must be set to 64.
Note: Subnets of different interfaces must not overlap in any
way (e.g., defining two interfaces with 10.0.0.1/8 and
10.50.10.1/24 is invalid). Each interface must have its own
address space.
Web/EMS: Gateway
[InterfaceTable_Gateway]
Defines the IP address of the default gateway for this
interface.
Notes:
A default gateway can be defined for each interface.
The default gateway's IP address must be in the same
subnet as the interface address.
Web/EMS: VLAN ID
[InterfaceTable_VlanID]
Defines the VLAN ID for each interface.
Note: The VLAN ID must be unique for each interface.
To Next Page
Loading...
