Version 6.2  155  February 2011 
SIP User's Manual   3. Web-Based Management 
 
Parameter  Description 
Web/EMS: Source IP 
Address 
Source IP address of the caller (obtained from the Contact header in 
the INVITE message). 
Notes: 
  This parameter is applicable only to the Number Manipulation tables 
for IP-to-Tel calls. 
  The source IP address can include the 'x' wildcard to represent 
single digits. For example: 10.8.8.xx represents all IP addresses 
between 10.8.8.10 to 10.8.8.99.  
  The source IP address can include the asterisk (*) wildcard to 
represent any number between 0 and 255. For example, 10.8.8.* 
represents all IP addresses between 10.8.8.0 and 10.8.8.255. 
Web: Stripped Digits From 
Left 
EMS: Number Of Stripped 
Digits 
Number of digits to remove from the left of the telephone number prefix. 
For example, if you enter 3 and the phone number is 5551234, the new 
phone number is 1234. 
Web: Stripped Digits From 
Right 
EMS: Number Of Stripped 
Digits 
Number of digits to remove from the right of the telephone number 
prefix.  For example, if you enter 3 and the phone number is 5551234, 
the new phone number is 5551. 
Web: Prefix to Add 
EMS: Prefix/Suffix To Add 
The number or string that you want added to the front of the telephone 
number. For example, if you enter '9' and the phone number is 1234, 
the new number is 91234. 
Web: Suffix to Add 
EMS: Prefix/Suffix To Add 
The number or string that you want added to the end of the telephone 
number. For example, if you enter '00' and the phone number is 1234, 
the new number is 123400. 
Web/EMS: Number of 
Digits to Leave 
The number of digits that you want to retain from the right of the phone 
number. For example, if you enter '4' and the phone number is 
00165751234, then the new number is 1234. 
Web: NPI 
EMS: Number Plan 
The Numbering Plan Indicator (NPI) assigned to this entry. 
  [0] Unknown (default) 
  [9] Private  
  [1] E.164 Public  
  [-1] Not Configured = value received from PSTN/IP is used 
Notes: 
  This parameter is applicable only to Number Manipulation tables for 
IP-to-Tel calls. 
  For a detailed list of the available NPI/TON values, see Numbering 
Plans and Type of Number on page 162