Version 6.2 209 February 2011
SIP User's Manual 3. Web-Based Management
Parameter Description
Operation
Action Subject
[ActionSubject]
SIP header upon which the manipulation is performed.
Action Type
[ActionType]
The type of manipulation to perform.
[0] Add (default) = adds new header/param/body (header or parameter
elements).
[1] Remove = removes header/param/body (header or parameter
elements).
[2] Modify = sets element to the new value (all element types).
[3] Add Prefix = adds value at the beginning of the string (string
element only).
[4] Add Suffix = adds value at the end of the string (string element
only).
[5] Remove Suffix = removes value from the end of the string (string
element only).
[6] Remove Prefix = removes value from the beginning of the string
(string element only).
Action Value
[ActionValue]
Value (string) that you want to use in the manipulation.
The syntax is as follows:
string/<message-element>/<call-param> "+" string/<message-
element>/<call-param>
For example:
'itsp.com'
header.from.url.user
param.call.dst.user
param.call.dst.host + '.com'
param.call.src.user + “<” + header.from.url.user + '@' + header.p-
asserted-id.url.host + '>'
Note: Only single quotation marks must be used.
Row Role
[RowRole]
Determines which condition must be used for the rule of this table row.
[0] Use Current Condition = The condition entered in this row must be
matched in order to perform the defined action (default).
[1] Use Previous Condition = The condition of the rule configured
directly above this table row must be used in order to perform the
defined action. This option allows you to configure multiple actions for
the same condition.
Note: When multiple manipulations rules apply to the same header, the
next rule applies to the result string of the previous rule.
To Next Page
Loading...
