AudioCodes Mediant 800 MSBG - Page 214

SIP User's Manual 214 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Source Username Prefix
[SrcUsernamePrefix]
The prefix of the source SIP URI user name (usually in the From
header). For any prefix, enter an asterisk (*), which is the default.
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 413.
Source Host
[SrcHost]
The source SIP URI host name - full name (usually in the From
header). For any host name, enter an asterisk (*), which is the default.
Destination Username
Prefix
[DestUsernamePrefix]
The prefix of the destination SIP URI user name (usually in the
Request-URI). For any prefix, enter an asterisk (*), which is the
default.
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 413.
Destination Host
[DestHost]
The destination SIP URI host name - full name (usually in the Request
URI). For any host name, enter an asterisk (*), which is the default.
Request Type
[RequestType]
SIP request type to which the manipulation rule is applied.
 [0] All = all SIP messages (default)
 [1] INVITE = all SIP messages except REGISTER and
SUBSCRIBE
 [2] REGISTER = only SIP REGISTER messages
 [3] SUBSCRIBE = only SIP SUBSCRIBE messages
 [4] INVITE and REGISTER = all SIP messages except
SUBSCRIBE
 [5] INVITE and SUBSCRIBE = all SIP messages except
REGISTER
Operation Manipulation Rule (when match occurs in characteristics)
Remove From Left
[RemoveFromLeft]
The number of digits to remove from the left of the user name prefix.
For example, if you enter 3 and the user name is "bobby", the new user
name is "by".
Remove From Right
[RemoveFromRight]
The number of digits to remove from the right of the user name prefix.
For example, if you enter 3 and the user name is "bobby", the new user
name is "bo".
Leave From Right
[LeaveFromRight]
The number of characters that you want retained from the right of the
user name.
Prefix to Add
[Prefix2Add]
The number or string that you want added to the front of the user
name. For example, if you enter 'sir' and the user name is "bobby", the
new user name is "sirbobby".