Version 6.2 601 February 2011
SIP User's Manual 8. IP Telephony Capabilities
Notes:
• The 'Source IP Group' field must not be configured; leave it at '-1'.
• The 'Is Additional Manipulation' field must be set to '0'.
• The 'Manipulation Purpose' field must be set to 'Normal'.
• For a detailed description of the fields in the 'IP to IP Inbound
Manipulation' table, see ''Configuring IP-to-IP Inbound Manipulations'' on
page 210. This table is currently located under the SBC menu.
8.5.3.5.3 SAS Routing Based on SAS Routing Table
SAS routing based on rules configured in the SAS Routing table is applicable for SAS in
the following states:
SAS in normal state, if the SASSurvivabilityMode parameter is set to 4
SAS in emergency state, if the SASSurvivabilityMode parameter is not set to 4
The SAS routing rule destination can be an IP Group, IP address, Request-URI, or ENUM
query.
For a detailed description of the SAS Routing table, see ''Configuring IP2IP Routing Table
(SAS)'' on page 218.
To Next Page
Loading...
