Version 6.2 61 February 2011
SIP User's Manual 3. Web-Based Management
Item # Description
For trunk ports, you can view the status of trunk channels by clicking the trunk port
icon (see Viewing Trunks' Channels on page 64).
If you right-click a port, a shortcut menu appears allowing you to perform the following:
(Analog ports only) Reset the channel port (see Resetting an Analog Channel on
page 62)
View the channel's port settings (see ''Viewing Analog Port Information'' on page
63)
Assign a name to the port (see ''Assigning a Port Name'' on page 62)
6
WAN port status icons:
(green): link is working
(gray): link is not configured
(red): link error
To view port information, see Viewing WAN Port Information on page 348. Depe
nding
on ordered hardware configuration, the WAN port can be Gigabit Ethernet, T1, or
SHDSL:
Gigabit Ethernet T1 WAN SHDSL
One Port
Two Ports
Four Ports
7
Gigabit Ethernet LAN port status icons:
(green): link is working
(gray): link is not configured
(red): link error
To view detailed port information, click the port icon (see Viewing Ethernet Port
Information on page 348).
8
Fast Ethernet LAN port status icons:
(green): link is working
(gray): link is not configured
(red): link error
To view detailed port information, click the port icon (see Viewing Ethernet Port
Information on page 348).
To Next Page
Loading...
