SIP User's Manual 632 Document #: LTRT-12804
Mediant 800 MSBG
FORMAT StaticRouteTable Index = StaticRouteTable InterfaceName,
StaticRouteTable_Destination, StaticRouteTable_PrefixLength,
StaticRouteTable_Gateway, StaticRouteTable_Description;
StaticRouteTable 0 = 0, 10.31.174.0, 24, 192.168.11.1, ;
StaticRouteTable 1 = 1, 174.96.151.15, 24, 10.32.174.12, ;
StaticRouteTable 2 = 3, 10.35.174.0, 24, 10.34.174.240, ;
[ \StaticRouteTable ]
; Layer 3 QoS parameters (DiffServ):
PremiumServiceClassMediaDiffServ = 46
PremiumServiceClassControlDiffServ = 40
GoldServiceClassDiffServ = 26
BronzeServiceClassDiffServ = 10
; *** TABLE DiffServToVlanPriority ***
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index = DiffServToVlanPriority_DiffServ,
DiffServToVlanPriority_VlanPriority;
DiffServToVlanPriority 0 = 0, 7;
DiffServToVlanPriority 1 = 46, 6;
DiffServToVlanPriority 2 = 40, 6;
DiffServToVlanPriority 3 = 26, 4;
DiffServToVlanPriority 4 = 10, 2;
[ \DiffServToVlanPriority ]
; Application Type for applications:
EnableDNSasOAM = 1
EnableNTPasOAM = 1
This ini file shows the following:
A Multiple Interface table with a an interface for OAMP applications (192.168.0.2/16),
an interface for Media & Control applications (10.32.174.50/24), an interface for Media
applications (10.33.174.50/24), and an interface for Control applications
(10.34.174.50/24).
Each interface is defined with its own VLAN ID, Default Gateway, and name.
A Routing table is configured with three static routing rules:
• Directing all traffic destined to subnet 10.31.174.0/24 to 192.168.11.1 over
Interface Index 0
• Directing all traffic destined to subnet 174.96.151.15/24 to 10.32.174.12 over
Interface Index 1
• Directing all traffic destined to subnet 10.35.174.0/24 to 10.34.174.240 over
Interface Index 3
Layer-3 QoS values are assigned:
• For Media Service class, the default DiffServ value is set to 46
• For Control Service class, the default DiffServ value is set to 40
• For Gold Service class, the default DiffServ value is set to 26
• For Bronze Service class, the default DiffServ value is set to 10
Layer-2 QoS values are assigned:
• For packets sent with DiffServ value of 46, set VLAN priority to 6
• For packets sent with DiffServ value of 40, set VLAN priority to 6
• For packets sent with DiffServ value of 26, set VLAN priority to 4
To Next Page
Loading...
