AudioCodes Mediant 800 MSBG - Page 685

Version 6.2 685 February 2011
SIP User's Manual 12. Configuration Parameters Reference
Parameter Description
individual parameter Password) are used for authentication.
 Authentication is typically used for FXS interfaces, but can
also be used for FXO interfaces.
 For configuring the Authentication table using the Web
interface, see Configuring Authentication on page 183.
 For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
Web: Account Table
EMS: SIP Endpoints > Account
[Account]
This ini file table parameter configures the Account table for
registering and/or authenticating (digest) Hunt Groups or IP
Groups (e.g., an IP-PBX) to a Serving IP Group (e.g., an
Internet Telephony Service Provider - ITSP). The format of this
parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1, 0;
Notes:
 This table can include up to 32 indices (where 1 is the first
index).
 You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same Hunt Group
or IP Group to several ITSP's (i.e., Serving IP Groups).
 For a detailed description of this table's parameters and for
configuring this table using the Web interface, see
''Configuring Account Table'' on page 133.
 For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Enables the use of a SIP proxy server.
 [0] No = Proxy isn't used and instead, the internal routing
table is used (default).
 [1] Yes = Proxy server is used. Define the IP address of the
proxy server in the 'Proxy Sets table' (see ''Configuring
Proxy Sets Table'' on page 126).
Note: If you are not using a proxy server, you must define
outbound IP call routing rules in the 'Outbound IP Routing
Table' (described in ''Configuring Outbound IP Routing Table''
on page 165).