AudioCodes Mediant 800 MSBG - Page 722

SIP User's Manual 722 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
9 [0] Disabled (default)
9 [1] Enabled
For example, below are defined two Coder Groups (0 and 1):
[ CodersGroup0 ]
FORMAT CodersGroup0_Index = CodersGroup0_Name,
CodersGroup0_pTime, CodersGroup0_rate,
CodersGroup0_PayloadType, CodersGroup0_Sce;
CodersGroup0 0 = g711Alaw64k, 20, 0, 255, 0;
CodersGroup0 1 = eg711Ulaw, 10, 0, 71, 0;
CodersGroup0 2 = eg711Ulaw, 10, 0, 71, 0;
[ \CodersGroup0 ]
[ CodersGroup1 ]
FORMAT CodersGroup1_Index = CodersGroup1_Name,
CodersGroup1_pTime, CodersGroup1_rate,
CodersGroup1_PayloadType, CodersGroup1_Sce;
CodersGroup1 0 = Transparent, 20, 0, 56, 0;
CodersGroup1 1 = g726, 20, 0, 23, 0;
[ \CodersGroup1 ]
The table below lists the supported coders:
Coder Name Packetization Time
(msec)
Rate
(kbps)
Payload
Type
Silence
Suppression
G.711 A-law
[g711Alaw64k]
10, 20 (default), 30,
40, 50, 60, 80, 100,
120
Always
64
Always 8 Disable [0]
Enable [1]
G.711 U-law
[g711Ulaw64k]
10, 20 (default), 30,
40, 50, 60, 80, 100,
120
Always
64
Always 0 Disable [0]
Enable [1]
G.722
[g722]
20 (default), 40, 60,
80, 100, 120
64
(default)
Always 9 N/A
G.723.1
[g7231]
30 (default), 60, 90,
120
5.3 [0]
(default),
6.3 [1]
Always 4 Disable [0]
Enable [1]
G.726
[g726]
10, 20 (default) 16 [0]
(default),
24 [1],40
[3]
Dynamic (0-
127)
Default is 23
Disable [0]
Enable [1]
G.729
[g729]
10, 20 (default), 30,
40, 50, 60, 80, 100
Always 8 Always 18 Disable [0]
Enable [1]
Enable w/o
Adaptations [2]
AMR-WB
[Amr-WB]
20 (default) 6.6 [0],
8.85 [1],
12.65 [2],
14.25 [3],
15.85 [4],
18.25 [5],
19.85 [6],
23.05 [7],
23.85 [8]
(default)
Dynamic (0-
127)
Disable [0]
Enable [1]
T.38
[t38fax]
N/A N/A N/A N/A
T.38 Version 3
[t38fax]
- - - -
Notes:
 The coder name is case-sensitive.