SIP User's Manual 730 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
DisconnectOnBusyTone, and Enable911PSAP.
The parameter IpPreference determines the priority of the Tel
Profile (1 to 20, where 20 is the highest preference). If both IP
and Tel Profiles apply to the same call, the coders and common
parameters (i.e., parameters configurable in both IP and Tel
Profiles) of the preferred profile are applied to that call. If the Tel
and IP Profiles are identical, the Tel Profile parameters take
precedence.
The parameter EnableVoiceMailDelay is applicable only if voice
mail is enabled globally (using the VoiceMailInterface parameter).
For a description of using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
To Next Page
Loading...
