SIP User's Manual 738 Document #: LTRT-12804
Mediant 800 MSBG
Parameter Description
Note: This parameter can also be configured per IP Profile, using
the IPProfile parameter (see ''Configuring IP Profiles'' on page
143).
Web: V.22 Modem Transport
Type
EMS: V22 Transport
[V22ModemTransportType]
V.22 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Note: This parameter can also be configured per IP Profile, using
the IPProfile parameter (see ''Configuring IP Profiles'' on page
143).
Web: V.23 Modem Transport
Type
EMS: V23 Transport
[V23ModemTransportType]
V.23 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Note: This parameter can also be configured per IP Profile, using
the IPProfile parameter (see ''Configuring IP Profiles'' on page
143).
Web: V.32 Modem Transport
Type
EMS: V32 Transport
[V32ModemTransportType]
V.32 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Notes:
This parameter applies only to V.32 and V.32bis modems.
This parameter can also be configured per IP Profile, using the
IPProfile parameter (see ''Configuring IP Profiles'' on page
143).
Web: V.34 Modem Transport
Type
EMS: V34 Transport
[V34ModemTransportType]
V.90/V.34 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Note: This parameter can also be configured per IP Profile, using
the IPProfile parameter (see ''Configuring IP Profiles'' on page
143).
EMS: Bell Transport Type
[BellModemTransportType]
Determines the Bell modem transport method.
[0] = Transparent (default)
[2] = Bypass
[3] = Transparent with events
To Next Page
Loading...
