Dell PowerConnect 5324 Command Line Interface Reference Manual

Configuration and Image Files 113
show running-config
The show running-config Privileged EXEC mode command displays the contents of the currently
running configuration file.
Syntax
show running-config [ sort type ]
•
sort type —Specifies the sorting type of the file. Can be one of the following values:
interface , feature .
Default Configuration
Sort type defaults to interface if unspecified.
Command Mode
Privileged EXEC mode
User Guidelines
• show running-config does not show all the port configurations under the port. Although the
device is already configured with some default parameters,”show running config” on an
empty device is empty.

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2