Dell PowerConnect 5324 Command Line Interface Reference Manual

74 AAA Commands
www.dell.com | support.dell.com
Example
The following example sets a local level 15 password "secret" to control access to user and privilege
levels.
username
The username Global Configuration mode command establishes a username-based authentication
system. To remove a user name use the
no form of this command.
Syntax
username name [ password password ] [ level level ] [ encrypted ]
no username name
• name —The name of the user. (Range: 1 - 20 characters)
•
password —The authentication password for the user. (Range: 1 - 159 characters).
•
level —The user level (Range: 1 -15).
•
encrypted —Encrypted password entered, copied from another device configuration.
Default Configuration
No user is defined.
Command Mode
Global Configuration mode
User Guidelines
• No password is required.
Example
The following example configures user "bob" with the password "lee" and user level 15 to the
system.
show users accounts
The show users accounts Privileged EXEC mode command displays information about the local
user database.
Console (config)# enable password level 15 secret
Console (config)# username bob password lee level 15

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2