Dell PowerConnect 5324 Command Line Interface Reference Manual

GVRP Commands 145
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example clears all the GVRP statistics information on port g8.
show gvrp configuration
The show gvrp configuration User EXEC mode command displays GVRP configuration
information, including timer values, whether GVRP and dynamic VLAN creation is enabled, and
which ports are running GVRP.
Syntax
show gvrp configuration [ ethernet interface | port-channel port-channel-number ]
•
interface —A valid Ethernet interface.
•
port-channel-number —A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
Console# clear gvrp statistics ethernet g8

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2