Dell PowerConnect 5324 Command Line Interface Reference Manual

382 802.1x Commands
www.dell.com | support.dell.com
show dot1x statistics
The show dot1x statistics Privileged EXEC mode command displays 802.1X statistics for the
specified interface.
Syntax
show dot1x statistics ethernet interface
• interface —The full syntax is: port .
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Field Description
Username The User-Name representing the identity of the Supplicant.
Login Time How long the user is logged in.
Last Authentication Time since last authentication.
Authentication Method The authentication method used to establish the session.
Mac address The supplicant MAC address.
Interface The interface that the user is using.

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2