Dell PowerConnect 5324 Command Line Interface Reference Manual

256 SNMP Commands
www.dell.com | support.dell.com
show snmp groups
To display the configuration of groups use the show snmp groups Privileged EXEC command.
Syntax
show snmp groups [ groupname ]
•groupnam — The name of the group .
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the configuration of views use the show snmp views Privileged
EXEC command.
Console # show snmp views
Name OID Tree Type
user-view 1.3.6.1.2.1.1 Included
user-view 1.3.6.1.2.1.1.7 Excluded
user-view 1.3.6.1.2.1.2.2.1.*.1 Included

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2