Dell PowerConnect 5324 Command Line Interface Reference Manual

132 Ethernet Configuration Commands
www.dell.com | support.dell.com
show interfaces counters
The show interfaces counters User EXEC mode command displays traffic seen by the physical
interface.
Syntax
show interfaces counters [ ethernet interface | port-channel port-channel-number ]
•
interface— A valid Ethernet port.
•
port-channel-number— A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays traffic seen by the physical interface:
Console# show interfaces description ethernet g1
Port Description
---- ------------------
g1 Management_port
g2 R&D_port
g3 Finance_port
Ch Description
---- ------------------
Ch 1 Output

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2