Syslog Commands 303
Syslog Commands
logging on
The
logging on
Global Configuration mode command controls error messages logging. This
command sends debug or error messages to a logging process, which logs messages to designated
locations asynchronously to the process that generated the messages. To disable the logging
process, use the
no
form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
• The logging process controls the distribution of logging messages to the various destinations,
such as the logging buffer, logging file, or syslog server. Logging on and off for these
destinations can be individually configured using the
logging buffered
,
logging file
, and
logging
Global Configuration mode commands. However, if the
logging on
command is
disabled, no messages are sent to these destinations. Only the console receives messages.
Example
The following example shows how logging is enabled.
logging
The
logging
Global Configuration mode command logs messages to a syslog server. To delete the
syslog server with the specified address from the list of syslogs, use the
no
form of this command.
Syntax
logging
{ip-address | hostname}
[
port
port
]
[
severity
level
] [
facility
facility
]
[
description
text
]
no logging
{ip-address | hostname}
•
ip-address
—IP address of the host to be used as a syslog server.
•
hostname
—Hostname of the host to be used as a syslog server. (Range: 1 - 158 characters)
Console (config)# logging on
To Next Page
Loading...
