Dell PowerConnect 5324 - Show Bridge Multicast Filtering; Show Ports Security

Address Table Commands 91
show bridge multicast filtering
The show bridge multicast filtering Privileged EXEC mode command displays the multicast
filtering configuration.
Syntax
show bridge multicast filtering vlan-id
• vlan_id— A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
In this example, the multicast configuration for VLAN 1 is displayed.
show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ ethernet interface | port-channel port-channel-number ]
•
interface —A valid Ethernet port .
• port-channel-number— A valid port-channel number .
Console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Static Status
------- ----------------- -----------
g1 Forbidden Filter
g2 Forward Forward(s)
g3 - Forward(d)