Dell PowerConnect 5324 Command Line Interface Reference Manual

360 Web Server
www.dell.com | support.dell.com
Default Configuration
The Certificate and the SSL RSA key pairs do not exist.
Command Mode
Global Configuration mode
User Guidelines
• The command is not saved in the device configuration; however, the certificate and keys
generated by this command are saved in the private configuration, which is never displayed to
the user or backed up to another device.
• Use this command to generate self-signed certificate for your device.
• When you export an RSA key pair to a PKCS#12 file, the RSA key pair is as secure as the
passphrase. Therefore, keep the passphrase secure.
Example
The following example regenerates a HTTPS certificate.
crypto certificate request
The crypto certificate request Privileged EXEC mode command generates and displays certificate
requests for HTTPS.
Syntax
crypto certificate number request common- name [ou organization-unit ] [o organization ] [l
location ] [st state ] [c country ]
• number —Specifies the certificate number. (Range: 1 - 2)
•
common- name —Specifies the fully qualified URL or IP address of the device. (Range: 1-
64)
•
ou organization-unit —Specifies the organization-unit or department name. (Range: 1-
64)
•
o organization —Specifies the organization name. (Range: 1- 64)
•
l location —Specifies the location or city name. (Range: 1- 64)
•
st state —Specifies the state or province name. (Range: 1- 64)
•
c country — Specifies the country name. (Range: 1- 2)
Default Configuration
There is no default configuration for this command.
Console (enable)# crypto certificate generate key-generate

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2