Dell PowerConnect 5324 Command Line Interface Reference Manual

304 Syslog Commands
www.dell.com | support.dell.com
• port —Port number for syslog messages. If unspecified, the port number defaults to 514.
(Range: 1 - 65535)
•
severity level —Limits the logging of messages to the syslog servers to a specified level:
emergencies , alerts , critical , errors , warnings , notifications , informational and
debugging . If unspecified, the default level is errors .
•
facility —The facility that is indicated in the message. Can be one of the following values:
local0, local1, local2, local3, local4, local5, local 6, local7 . If unspecified, the port
number defaults to
local7 .
•
text —Syslog server description, which can be up to 64 characters.
Default Configuration
As described in the field descriptions.
Command Mode
Global Configuration mode
User Guidelines
• Multiple syslog servers can be used.
• If no specific severity level is specified, the global values apply to each server.
Example
The following example configures messages with a "critical" severity level so that they are logged to
a syslog server with an IP address 10.1.1.1.
logging console
The logging console Global Configuration mode command limits messages logged to the console
based on severity. To disable logging to the console terminal, use the
no form of this command.
Syntax
logging console level
no logging console
• level —Limits the logging of messages displayed on the console to a specified level:
emergencies, alerts , critical , errors, warnings , notifications, informational, debugging.
Default Configuration
The default is informational .
Console (config)# logging 10.1.1.1 severity critical

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2