EasyManuals Logo

Dell PowerConnect 5324 Command Line Interface Reference Manual

Dell PowerConnect 5324
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #305 background imageLoading...
Page #305 background image
Syslog Commands 305
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example limits messages logged to the console based on severity level "errors".
logging buffered
The
logging buffered
Global Configuration mode command limits syslog messages displayed from
an internal buffer based on severity. To cancel the buffer use, use the
no
form of this command.
Syntax
logging buffered
level
no logging buffered
level
—Limits the message logging to a specified level buffer:
emergencies, alerts
,
critical
,
errors, warnings
,
notifications, informational, debugging.
Default Configuration
The default level is
informational
.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the commands
displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer based on the
severity level "debugging".
logging buffered size
The
logging buffered size
Global Configuration mode command changes the number of syslog
messages stored in the internal buffer. To return the number of messages stored in the internal
buffer to the default value, use the
no
form of this command.
Console (config)# logging console errors
Console (config)# logging buffered debugging

Table of Contents

Other manuals for Dell PowerConnect 5324

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 5324 and is the answer not in the manual?

Dell PowerConnect 5324 Specifications

General IconGeneral
Switching Capacity48 Gbps
VLAN SupportYes
Rack MountableYes
Device TypeSwitch
MAC Address Table Size8K entries
RAM64 MB
Flash Memory8 MB
Power DeviceInternal power supply
Voltage RequiredAC 120/230 V (50/60 Hz)
Jumbo Frame SupportYes
Ports24 x 10/100/1000 + 2 x SFP
ManagementWeb-based, SNMP, CLI
Enclosure TypeRack-mountable
Routing ProtocolStatic IP routing
Remote Management ProtocolSNMP 1, 2, 3
FeaturesFlow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature0 °C to 45 °C
Storage Temperature-20 °C to 70 °C
Humidity5% to 95% (non-condensing)
LayerLayer 2

Related product manuals