User Interface 337
Command Mode
Privilege EXEC command mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables the debug command interface.
show history
The
show history
User EXEC mode command lists the commands entered in the current session.
Syntax
show history
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
• The commands are listed from the first to the latest command.
• The buffer is kept unchanged when entering to configuration mode and returning back.
• The command in the buffer includes the commands that were not executed.
console(config)#
console# debug
>debug
Enter DEBUG Password: *****
DEBUG>
To Next Page
Loading...
