Dell PowerConnect 5324 Command Line Interface Reference Manual

214 QoS Commands
www.dell.com | support.dell.com
qos map dscp-queue
The qos map dscp-queue Global Configuration mode command modifies the DSCP to queue
map. To return to the default map, use the
no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
• dscp-list —Specify up to 8 DSCP values, separate each DSCP with a space.
(Range: 0 - 63)
•
queue-id —Enter the queue number to which the DSCP value corresponds.
Console# show qos interface ethernet g1 queuing
Ethernet g1
wrr bandwidth weights and EF priority:
qid weights Ef Priority
1 125 dis N/A
2 125 dis N/A
3 125 dis N/A
4 125 dis N/A
Cos-queue map:
cos qid
0 2
1 1
2 1
3 2
4 3
5 3
6 4
7
4

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2